WHAT YOU’LL NEED
C
G
M
F
DB
A
L
I
J
K
E
H
[I] Router to make lap joints
[A] Printed circuit boards [H] 10" table saw or water-cooled diamond saw
[B] 2'× 4', 11.5mm-thick (used in cutting tile)
Baltic birch plywood
(it is not ½" thick)
[C] Small pieces of maple [J] Drill
or other hard wood for
knobs and strips [K] Sander
[D] Wood glue [L] Various grits
of sandpaper
[E] Spray-on polyurethane
[M] Clamps
[F] Small wood screws
(½" or less) or epoxy glue Hammer and other tools
[G] Small length of
¼" dowel
